Saturday, December 7, 2013

Service Panel/Busted Pipes

Electrician came and installed the electric service panel and grounds.

 Ground

4g Wire

 Four copper pipes burst when we neglected to drain the system one night.


A blessing In disguise, it turns out that the company that made made the heating panel forgot to solder a joint (shown by the pipe with bare copper)

Fixed

Monday, December 2, 2013

Insulated Fish Tank and LEDs

Almost done

Bio filter wraped with a single layer of Reflectix

2" Drain plumbing

To be filled with Bio-balls or gravel

Insulated 55 gallon drum 

R-13 Insulation covered with Reflectix bubble wrap

Plumbing

Heat transfer coil

Hot Water Heating Coils 
99' of 1/2" Poly tubing

Drum with biofilter 

300w Aquarium heater

Foam lid with plumbing holes.

When tested 15 gallons of water beginning at 55C and dropped to 33C in 11 hours and was 33C at 14 hours

Aluminium Stock

Buck Block wiring
Trimmed and shrink wrapped


Transformer for Light rail
24v x 1.7A = 40.8w

First LED rail mounted

Testing last light rail for this bed.


Greenhouse LEDs at night.
A little brighter than Floros, and no mercury.

LED lighting from 6"

Greenhouse Lights from the road.


Colorado Aquaponics





A road to the greenhouse?


West Side

Top Side

East Side

South Side

Day 2

Day 3

Day 4

Day 5

Day 6

Bearing weight